MULTI VOLT(36V) Cordless Rotary Hammer DH36DMA
Electric(AC)Performance without the Cord
The MULTI VOLT DH36DMA cordless rotary hammer is our first SDS-max cordless rotary hammer that uses the high-power BSL36B18
MULTI VOLT battery and a brushless motor. It delivers a drilling speed and demolition performance comparable to its corded counterpart.
Speed of the DH40MC rotary hammer indexed at 100.
When drilling a Ø25mm hole into concrete with compressive strength of 2,352N/cm2 (240kgf/cm2).
When demolishing concrete with a compressive strength of 2,352N/cm2 (240kgf/cm2).
Runtime per Charge*(with BSL36B18 battery)
Approx. 25 Holes (Drilled in Ø25x60L Concrete)
Approx. 11 Min. (Equivalent to 26kg Concrete Breaking)
- Values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions.
With part of its aluminum die-cast cylinder case and crank case
exposed, the DH36DMA looks robust and sophisticated.
Ease of Use
One-push Bit Mounting
Only one action instead of the conventional two is required to mount a bit. All that needs to be done is to insert the bit into the tool holder while turning it.
Large Change Lever
Large change lever is located on top of the tool body for easy visibility and smooth mode changing.
Hammering (for demolition)
Neutral (for multiple bit-angle settings)
Rotation + Hammering (for drilling)
Multiple Bit-angle Settings
The chisel can be rotated at 12 different angles with the change lever positioned at 'neutral'.
Low Vibration Handle
The HiKOKI low vibration handle, which consists of the upper unit with rubber dampers and the lower unit with a hinge, reduces vibration and user fatigue, offering high productivity.
Constant Speed Control with Variable Speed
Four-step impact rates between 1,420bpm and 2,860bpm can be selected by the rotation speed selector switch.
A battery stopper helps prevent the battery from accidentally falling out of the tool. The battery cannot be removed unless both the stopper and the battery latches are released.
Reactive Force Control
When the tool bit is suddenly overburdened during operation, the slip clutch disengages the gears or the tool's built-in controller stops
the motor's output before the entire tool jerks.
specified performance. Make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation.
|Core Bit||105mm (4-1/8")|
|Bit Shank||SDS max|
|No Load Speed||260 – 590/min|
|Full Load Impact Rate||1,420 – 2,860/min|
|Overall Length||496mm (19-17/32")|
|Weight*1||7.9kg (17.4lbs.) with BSL36B18|
|Vibration Total Values*2
(triax vector sum)*2
|Hammer Drilling into Concrete||Vibration emission value ah, HD = 11.8 m/s2|
|Uncertainty K = 2.6 m/s2|
|Equivalent Chiseling Value||Vibration emission value ah, CHeq = 9.6 m/s2|
|Uncertainty K = 1.5 m/s2|
|Standard Accessories*3||2 Batteries (BSL36B18), Charger (UC18YSL3), Side Handle,
Depth Gauge, Battery Cover, Grease A (30g), Carrying Case
- Weight according to EPTA-Procedure 01/2003.
- The vibration total values were determined according to EN60745.
- Supplied accessories vary by country or area.